Within the food sector, steam is used for drying, processing, and heating, and for general use like in sanitizing. Some sort of steam generation process is included in many food processing plants.
The requirement for steam varies in various operations; and in certain plants or portions of the plant, steam is used continuously, although it is used intermittently others. The steam production system must be adapted to the operations which will be carried out within a plant. Since the boiler room is the energy source for most processes, the system has to be designed with potential expansion and maintenance in mind.
Steam is generated in a boiler or steam generator. The boiler is placed in a building that's frequently separate from the primary processing area. It's always surprising to step into a boiler room to find the cleanest and best-preserved piece of equipment on the premises. There are numerous types and sizes of boilers which may be seen in the industry. Browse online websites if you are Looking for buying good quality of Boiler tubes and pipes (which is also known as "หม้อไอน้ำท่อและท่อ" in the Thai language).
Essentially, a boiler could be regarded as a closed container with water under pressure within it. In a furnace, the chemical energy of a fuel is converted into heat energy that must be transferred into the water in such a way that as little as possible of this warmth is lost.
The heat of combustion is transferred into the water with conduction, convection, and radiation. The contribution of all these modes of heat transfer is dependent on the type and design of the boiler. The two principal kinds of boilers used for industrial uses are fire-tube and water-tube boilers.
In this boiler, hot combustion gases operate through the boiler tubes. The tubes are surrounded by all the water which will be heated. This system is comprised of a large pressure vessel which will also contain the water and steam. In certain programs, the furnace can be housed in the same vessel.
Fire-tube boilers are available with pressure outputs of 103.4 to 2413 kPa. When higher pressures are required, the shell of the boiler has to be made of thicker material.